How can I determine the proper mixing time for the feed mixer
Although the main function of a feed mixer is to evenly mix various feeds, it is still necessary to determine the mixing time of the feed mixer. Stirring for a long time wastes energy, increases costs, and creates static electricity from material friction. If the mixing time is too short, it will inevitably reduce the mixing uniformity of the feed. The large rice mill suggests that the mixing time of the feed mill is very important.
The stirring time is short, the components are not evenly distributed in the material, so the coefficient of variation is large. With the increase of stirring time, the distribution of components became more uniform and the coefficient of change gradually decreased. However, when the stirring time is too long, segregation and re-separation will inevitably occur due to the electrostatic effects of convection, shear, diffusion and friction of the material, and the coefficient of variation will increase. It can be seen that the mixing time of the mixer plays an important role in improving product quality, saving energy and improving production efficiency.
By introducing the above information, we can clearly understand the importance of determining the mixing time of the feed mixer. At the same time, various reasons should be considered when determining the mixing time of the feed mixer, such as the type of mixer, mixing time, load factor and material characteristics.
Maintenance of Blender
1. Be sure to ground the wire when using.
2. When working, if the stirring rod is found to be unstable with different centers, please turn off the power and adjust the clamping chuck to make the stirring rod concentric.
3. Medium speed stirring can reduce vibration and prolong service life.
4, The instrument should be kept dry.
5, The ambient temperature: 0 to 50℃, no corrosive gas.
6, Relative humidity: 35%-85% (no condensation).
7, Do not overload use.
8. In order to ensure safe use, please use the grounding wire.
If not used for a long time, please store in a dry and non-corrosive gas place.